Electrician in Margate, FL
Family owned and operated in Pompano Beach, led by Master Electrician Lanny Donnell with nearly 30 years of South Florida experience. Call us at (954) 400-8891 for Margate electrical service.
Serving Margate Homeowners and Businesses
Margate is a residential city west of Pompano Beach, built out largely in the 1970s as a planned community with neighborhoods of single-family homes and attached villas. That era of construction is the defining fact for electrical work here. Homes from the mid-1970s are now fifty years old, which puts their original panels, breakers, and in some cases aluminum branch wiring squarely in the window where problems show up. The good news is that the homes are solidly built and the work to bring them up to current code is straightforward.
Margate is served by Florida Power & Light (FPL). We pull the required electrical permit through the Margate building department and coordinate the inspection for any panel upgrade, new circuit, or wiring remediation.
Electrical Work We Do in Margate, FL
Margate service calls center on the age of the housing stock. We inspect for aluminum branch wiring, upgrade aging panels to modern 200-amp service, replace worn outlets and switches with GFCI-protected devices, and add whole-home surge protection at the panel. Every job is led by Master Electrician Lanny Donnell, permitted through the Margate building department when required, and completed to current Florida code.
Aluminum Wiring Replacement & Repair
Inspect and replace or repair aluminum branch wiring that can overheat at connections.
Learn moreElectrical Panel Upgrades & Replacement
Replace outdated, undersized, or corroded breaker panels with modern 200A service for today's loads.
Learn moreWhole-Home Surge Protection
Panel-mounted surge protection against South Florida lightning and storm-related power surges.
Learn moreElectrical Troubleshooting & Repair
Fast diagnosis of flickering lights, dead outlets, tripping breakers, and faulty circuits.
Learn moreOutlets, Switches & GFCI Protection
Replace old receptacles and switches, add GFCI protection, USB outlets, and new receptacles.
Learn more1970s Planned Communities and the Aluminum Wiring Window
A lot of Margate's neighborhoods were built in the mid-1970s, which places them right in the aluminum branch wiring window. Aluminum was used for branch circuit wiring in many homes built roughly between 1965 and 1973, and Margate's older 1970s sections sometimes fall on the edge of that era. We inspect the wiring at the panel and a few devices, confirm whether it is aluminum or copper, and recommend full replacement or a safe remediation based on what we actually find. We keep the explanation short here and link to our full aluminum wiring page for the details.
The panels are the other half of the conversation. A breaker panel installed in 1975 has done decades of service in the Florida heat, and the breakers, bus bars, and lugs are worn even if the box still looks intact. We upgrade the panel to a modern 200-amp service when the existing one is undersized for today's loads, and we pair it with whole-home surge protection against the lightning and grid spikes that come with South Florida summers. For a 1970s Margate home, that combination is the foundation of a reliable electrical system.
Resurgence Electric LLC serves Margate and the surrounding Broward County communities from our Pompano Beach base. Pan and zoom the map to explore Margate.
Nearby South Florida Towns We Also Serve
Margate Electrical FAQ
Was my 1970s Margate home wired with aluminum?
Homes from the mid-1970s are on the edge of the aluminum wiring era, which ran roughly 1965 to 1973. We inspect the branch wiring at your panel and a few devices to confirm whether it is aluminum or copper, then recommend the right path based on the condition.
Should I upgrade the panel in my Margate home?
If the panel is original to a 1970s home and showing wear, or you are adding an EV charger or pool pump, a 200-amp upgrade is often the right call. We run a load calculation first so the recommendation fits your actual usage.
Is whole-home surge protection worth it in Margate?
Yes. Summer lightning and grid switching in South Florida send voltage spikes through the panel that damage HVAC and electronics. A panel-mounted surge device stops them at the service entrance before they reach your equipment.
How do I schedule electrical service in Margate?
Call us at (954) 400-8891 or submit the form on this page. The appointments line at (954) 708-4721 is also available to schedule a visit for your Margate home.
Need an answer specific to your Margate property? Call (954) 400-8891 and Master Electrician Lanny Donnell will walk you through it. We pull required permits through the Margate building department and complete all work to current Florida code.
Request Electrical Service in Margate
Tell us about your Margate project. Master Electrician Lanny Donnell and our South Florida team will respond promptly. Call (954) 400-8891 for the fastest response.